DemoFlex TMS Plus: Underlayment Set consists of: Can(s) of DemoFlex Adhesive (150sf coverage) along with Rolls of the DemoFlex TMS Plus membrane together covering 150-450 square feet and the corresponding Seam Tape.
DemoFlex TMS Plus: Underlayment Set has achieved an IIC rating of 66 and STC rating of 66 for sound deadening to be used in ceramic tile floor installations with an IIC Delta of 17.
Heavy Traffic Classifications in ASTM C627 Robinson testing proves its suitability for commercial & residential use. The ANSI A126.96.36.199 standards for High Performance Crack-Isolation Classifications add value to the life of the floor along with the membranes passing ANSI 188.8.131.52 Hydrostatic Pressure testing by the TCNA. DemoFlex TMS Plus requires the use of DemoFlex Adhesive which can be sold separately.
By encapsulating the mortar between the tile & membrane along with allowing the tiles to be removed in full pieces with no mortar left to grind,certified exposure testing completed utilizing DemoFlex reported that the exposure was so far below the Permissible Exposure Limit (PEL) 25 µg/m3 standard set by OSHA-1926.1153 that it was classified as “non-detectable” which is the lowest reportable level of exposure.
This will help reduce the need for having regulated work-zones because the exposure is so low and won’t likely even reach the OSHA standards. (click here for more information on the new Silica Standards)
From a standing position, spray the DemoFlex Adhesive onto the existing substrate/concrete, wait 20-40 minutes for the adhesive to activate, thoroughly press the DemoFlex into the DemoFlex Adhesive then it is immediately ready to set the Mortar, Tile and Grout directly on top of our membrane following industry standards.
It is recommended to treat the seams & perimeter with DemoFlex Tape (included) or with a high quality silicone caulk.
|Dimensions||20 × 10 × 15 in|